CP1L-M30DT-D Manual OMRON PLC CP1L-M30DT-D INSTRUCTIONS REFERENCE MANUAL

Power supply: DC power supply.
Output method: Transistor output sink type.
Inputs points: 18 points.
Outputs points: 12 points.Unit type: CJ1 Special I/O Units.
Product name: Analog Input Unit.
I/O points: 8 inputs;
Signal range selection: 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 to 10 V, 4 to 20mA;
1/4,000(Settable to 1/8,000)*2 OMRON PLC INSTRUCTIONS REFERENCE MANUAL.
Conversion period: 1 ms/point,
(250 μs/point can also be set CP1L-M30DT-D)*2.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F. S. Current: ±0.4% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.42A; 24V, --.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup OMRON PLC INSTRUCTIONS REFERENCE MANUAL.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals. NO. OF I/O SLOTS: 6 SLOTSModel : C500-AP003.
Necessary for Handheld Programming Console.Product name: N@@-type CPU Units with 20 I/O Points.
Specifications: Power Supply, 24 VDC; Inputs, 12; Outputs, 8;
Output type: Transistor (sourcing) OMRON PLC INSTRUCTIONS REFERENCE MANUAL.
Program capacity: 8K steps.
memory Data capacity: 8K words.
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.23A; 24 V，0.02A.
Standards: UC1, N, L, CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient CP1L-M30DT-D INSTRUCTIONS REFERENCE MANUAL.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality CP1L-M30DT-D INSTRUCTIONS REFERENCE MANUAL.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. Specification: 16 output points.Model : CVM1-PRO01-V1.
Position Control Unit (NC222) for.
Body.Connects to the I/O module located on the extreme right CP1L-M30DT-D INSTRUCTIONS REFERENCE MANUAL. Name: e-CON Connectors.
Specifications: Inputs/Outputs;
16 inputs /16 outputs; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-llevel I/O distribution reduces,
wiring in the system CP1L-M30DT-D Manual.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee OMRON PLC INSTRUCTIONS REFERENCE MANUAL.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.