CP1E-N60S1DT1-D Manual OMRON PLC CP1E-N60S1DT1-D Software OPERATION MANUAL

CV500-MC Special I/O Unit Motion Control Servo Control 4 axis CV500-MC421.Unit type: CS1 Basic I/O Units.
Product name: B7A Interface Unit.
Specifications: 32 outputs.
Mountable Racks: CPU Rack, CS1W-BC,
@@3, Yes, @@2, Yes;
C200HX/HG/HE Expansion I/O Rack, No.
CS1 Expansion Rack, CS1W-BI,
@@3, Yes, @@2, Yes;
CS1 Long distance Expansion Rack, Yes;
SYSMAC BUS Slave Rack, No OMRON PLC OPERATION MANUAL CP1E-N60S1DT1-D
Words required: 2 words.
Current consumption: 5V system, 0.09A;
26 V system, --.
Standards: UC1, CE.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control. C500-CT/3G2A5-CT Special I/O Unit High-speed Counter Unit 50 kcps 1 pts C500-CT012(3G2A5-CT012).Unit type: CJ1 CPU Bus Units OMRON PLC OPERATION MANUAL.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming;
No. of axes: 16 axes.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency OMRON PLC OPERATION MANUAL.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control.
A wide range of position control,
functions are available with,
this position control unit CP1E-N60S1DT1-D OPERATION MANUAL.
I/O Link of 8 input bits and 8 output bits Name: e-CON Connectors.
Specifications: Outputs; 8 outputs ; PNP;
Without Short-circuit and,
Disconnected Line Detection CP1E-N60S1DT1-D OPERATION MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1E-N60S1DT1-D OPERATION MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to deteect errors on site CP1E-N60S1DT1-D Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Specifications: 2 × RS-232C ports, protocol macro funnction OMRON PLC OPERATION MANUAL. Model: CPM2C-10EDR. Units with 10 I/O points.
1 I/O terminal block.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: relay.