Safety Relay Unit G9SE-221-T30 datasheet PDF datasheet OMRON G9SE-221-T30 PDF catalog

Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: DC load.
Zero cross function: --.
Rated input voltage: DC 24V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel G9SE-221-T30 PDF datasheet .
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals G9SE-221-T30
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires G9SE-221-T30 PDF datasheet .
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Easy-to-use, Space-saving Terminal Relay with Four-point Output.
Almost the same size as PYF Socket: 31 x 35 x 68 mm (W x H x D).
Each terminal circuit (with coil or contact) is independent from one another G9SE-221-T30 PDF datasheet .
Short Bar ensures easy connection of common and adjacent terminals.
Provided with a terminal cover that prevents electric-shock ac cidents.
Relay and MOS FET relay models are available OMRON G9SE-221-T30 PDF catalog.
LED operation indicator.
Built-in diode absorbs coil surge.
Mounts either on DIN track or screws.
Tool for easy mounting or removal of Relays provided OMRON G9SE-221-T30 PDF catalog.
UL, CSA, and VDE certification for standard models (VDE: G6D-F4B only). Input terminals: Screwless clamp terminals (detachable).
Isolation method: Phototriaccoupler.
Zero cross function: Yes.
Operation indicator: Yes.
Alarm output: 2 outputs (Heater Burnout Detection,
SSR Short-circuit Failure Detection) OMRON G9SE-221-T30 PDF catalog.
Applicable load (See note.): 2 to 35 A, 100 to 240 VAC.
A New-concept SSR with Built-in.
Current Transformer.
Heater Burnout and SSR Short.
circuit Failure Detection.
Built-in Current Transformer (CT) helps reduce wiring steps.
Detects the burnout of any one of a group of heaters.
Detects the burnout of 3-phase heaterrs G9SE-221-T30 datasheet.
Detects SSR short-circuit failures.
Error detection level can be easily set with a switch.
Mounts to a DIN track or with screws.
Three types of input terminals available: M3 terminals,
screwless clamp termiinals (detachable), or compact slotted,
screw terminals (detachable) G9SE-221-T30 PDF datasheet .
Certified for CSA and EN (TÜV).
The G3PF-2@@B-@@@ Series is UL certified.