Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button KS1-ANSW90 PDF datasheet.
The set time value can be checked easily because operation time,
is indicated from the start of operation
KS1-ANSW90
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements KS1-ANSW90 PDF datasheet. It is recommended to test operation,
before using the K2CM. Type of input: AC current input.
Output type: DeviceNet; -; DeviceNet.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with KS1-ANSW90 PDF datasheet.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.
Protect motors and other equipment from unstable,
voltages in the power supply system.
Protect motors and other equipment by detecting,
phase sequence and phase loss for three-phase,
power supplies.
Phase loss detection while the motor is operating.
Global application with power supply range of 200 to 480 V with one Relay.
Greater resistance to inverter noise.
Width of 17.5 mmm to reduce space required in panels KS1-ANSW90 PDF catalog.
Push-In Plus Terminal that reduce wiring work.
The use of cage clamps enables wiring with bare stranded wires.
Double-insertion holes for crossover wiring (all terminals).
UL listed ffor easy shipping to North America KS1-ANSW90 PDF catalog.
Certification is pending for LR standards.
Models added with transistor outputs for superior contact reliability.