CP1E CPU Units CP1E-N30S1DT-D datasheet PDF catalog OMRON CP1E-N30S1DT-D PDF datasheet

Number of inputs: 16 pts.
Input Voltage: 24V DC.
Input Current: 6 mA.Inputs: 8.C500-OC I/O Unit Transistor Output 16 pts C500-OC221-E(3G2A5-OC221-E).
AC250/DC24V 2A.Name: SYSMAC LINK Module.
Model: C200HW-SLK14.
Communications method: N: N token bus.
Transmission method: Manchester code, base band CP1E-N30S1DT-D PDF catalog .
Transmission path: Daisy chain.
Weight: 500g max.Unit type: CS1 Special I/O Units CP1E-N30S1DT-D
Product name: Isolated-type,
Resistance Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: Pt100, JPt100.
Conversion speed (resolution):
250 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0 CP1E-N30S1DT-D PDF catalog . 25A; 26V, --.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling CP1E-N30S1DT-D PDF catalog .
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems OMRON CP1E-N30S1DT-D PDF datasheet OMRON CP1E-N30S1DT-D PDF datasheet.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools OMRON CP1E-N30S1DT-D PDF datasheet. Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No. of axes: 2.
No. of unit numbers allocaated: 1 CP1E-N30S1DT-D datasheet.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion networkk with one Position,
Control Unit that supports MECHATROLINK-II CP1E-N30S1DT-D PDF catalog .
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.