LK Automation Limited
Home >> Download >> OMRON >> Manual Download >> safety limit switch D4N-422H INSTRUCTION sheet OMRON D4N-422H Manual

safety limit switch D4N-422H INSTRUCTION sheet OMRON D4N-422H Manual

Product model: D4N-422H
Name: safety limit switch
Brand: OMRON
Sort: INSTRUCTION sheet
File language: English
File size: 0.61MB
Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (without indicator).
Lock and release type: Mechanical lock Solenoid release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 4-contact Model,
Insert the built-in switch (A, B, C, D, S, T, U or V) into the blank @ D4N-422H INSTRUCTION sheet.
Conduit size (See Note D4N-422H): M20.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available) D4N-422H INSTRUCTION sheet.
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames D4N-422H INSTRUCTION sheet.
The plastic material makes the Slide Key suitable,
for lightweight doors. Ratings: Standard load; 0.1 A at 125 VAC, 0.1 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Roller lever.
Cable length : 5 m OMRON D4N-422H Manual.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models OMRON D4N-422H Manual. )
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models OMRON D4N-422H Manual.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation. D4N-422H . )
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Actuator type: Wire spring.
Compact Vertical Models Sized for Asian.
Standards.
Compact new design approximately 1/3 the size of OMRON,,
vertical Limit Switches D4N-422H INSTRUCTION sheet.
Structure enables the terminal section to be fully opened for,
easy wiring.
RoHS complaint.
Degree of protection: IP65.
Related products
OMRON
Safety Limit Switch
D4N-8C2H
OMRON Safety Limit Switch D4N-8C2H
Actuator: Adjustale roller lever, form lock
OMRON
Safety Limit Switch
D4N-1A2H
OMRON Safety Limit Switch D4N-1A2H
Actuator: Adjustale roller lever, form lock
OMRON
Safety Limit Switch
D4N-6C2H
OMRON Safety Limit Switch D4N-6C2H
Actuator: Adjustale roller lever, form lock
OMRON
Safety Limit Switch
D4N-6D2G
OMRON Safety Limit Switch D4N-6D2G
Actuator: Adjustale roller lever, form lock