LK Automation Limited
Home >> Download >> OMRON >> Manual Download >> remote i/o terminal DRT2-OD32ML-1 Manual OMRON DRT2-OD32ML-1 INSTRUCTION Manual

remote i/o terminal DRT2-OD32ML-1 Manual OMRON DRT2-OD32ML-1 INSTRUCTION Manual

Product model: DRT2-OD32ML-1
Name: remote i/o terminal
Brand: OMRON
Sort: INSTRUCTION Manual
File language: English
File size: 0.36MB
Actuator: One-way roller arm lever (vertical).
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms DRT2-OD32ML-1 Manual.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement DRT2-OD32ML-1
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Ratings: Standard load; 4 A at 30 VDC DRT2-OD32ML-1 Manual.
Cable: VCTF cable *2.
Actuator: Sealed roller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material DRT2-OD32ML-1 Manual.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers OMRON DRT2-OD32ML-1 INSTRUCTION Manual.
Models with red LED indicators added to series for easy,
confirmation of operation OMRON DRT2-OD32ML-1 INSTRUCTION Manual.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Release key type: Special release key.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+2NC/1NO OMRON DRT2-OD32ML-1 INSTRUCTION Manual.
Conduit opening: M20.
Holding Force of 3,000 N.
Two safety circuits and ttwo monitor contacts provide an,
array of monitoring patterns DRT2-OD32ML-1 .
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas. DRT2-OD32ML-1 Manual.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection.
Related products
OMRON
Board Terminals with MIL Connector
DRT2-OD32B-1
OMRON Board Terminals with MIL Connector DRT2-OD32B-1
Specifications: Outputs, PNP common, 32 o
OMRON
CompoNet Gateway Unit for CC-Link
CRT1-VMD32ML-1
OMRON CompoNet Gateway Unit for CC-Link CRT1-VMD32ML-1
Name: MIL Connectors. Specifications: Inputs
OMRON
MIL Connector Terminals with Transistors
DRT2-OD16ML
OMRON MIL Connector Terminals with Transistors DRT2-OD16ML
Specifications: Outputs NPN - common 16 p