R88M-K2K010C-BS2-Z Manual OMRON R88M-K2K010C-BS2-Z INSTRUCTION sheet

Support for a Wide Range of Applications with Position Control,
Speed Control, Torque Control.
High-speed Response.
The G-series AC Servomotors and Servo Drives have,
achieved high-speed response capabilities, with a high,
response frequency of 1 kHz.
Suppressing Vibration of Low-rigidity Mechanisms during,
Acceleration/Deceleration OMRON R88M-K2K010C-BS2-Z INSTRUCTION sheet.
The damping control function suppresses vibration of,
low-rigidity mechanisms or devices whose ends tend to,
vibrate R88M-K2K010C-BS2-Z Two damping filters are provided to enable switching,
the vibration frequency automatically according to the direction,
of rotation and also via an external signal. In addition,
the settings can be made easily merely by setting the vibration,
frequency and filter values, and you are assured of stable,
operation even if the settings are inappropriate OMRON R88M-K2K010C-BS2-Z INSTRUCTION sheet.
High-speed Positioning via Resonance Suppression Control,
The realtime autotuning function automatically estimates,
the load inertia of the machine in realtime and sets the,
optimal gain. The adaptive filter automatically suppresses,
vibration caused by resonance. Also, two independent,
notch filters make it possible to reduce vibration of a,
mechanism with multiple resonance frequencies OMRON R88M-K2K010C-BS2-Z INSTRUCTION sheet. Rated voltage: 200 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage.
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0.260 A; 60 Hz, 0.220 A .
Rated input: 50 Hz, 50 W; 60 Hz, 48 W.
Rated rotational speed: 50 Hz, 2650 r/min; 60 Hz, 3100 r/min.
Maximum flow rate: 50 Hz, 4.8 m3/min; 60 Hz, 5.7 m3/min.
Maximum static pressure: 50 Hz, 104 Pa; 60 Hz, 107 Pa.
Noise: 50 Hz, 56 dB; 60 Hz, 58 dB.
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed moddels,
(28 type) included in series R88M-K2K010C-BS2-Z Manual.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certiffied safety standards depend on the,
product R88M-K2K010C-BS2-Z Manual. Check the information given for available models of Axial fans and,
the information in Characteristics.