PLC Module CJ1G-CPU42P FUNCTION BLOCK REFERENCE MANUAL OMRON CJ1G-CPU42P Manual

Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program CJ1G-CPU42P REFERENCE MANUAL CJ1G-CPU42P
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communications procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components CJ1G-CPU42P REFERENCE MANUAL. Model : C500-LK201-EV1.
RS-232C/RS-422.CPU Unit: CP1H-XA CPU Units.
Specifications: CPU type, Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Analog inputs: 4, Analog outputs: 2;
Power supply, DC power supply; Output method, Transistor output (sinking);
Inputs, 24; Output, 16 CJ1G-CPU42P REFERENCE MANUAL.
Standards: UC1, N, L, CE.
4 Axis Position Control and Comprehensive Programmable Controller.
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O OMRON CJ1G-CPU42P Manual.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O. 100 to 120/200 to 240 VAC (switchable), Wired.Name: e-CON Connectors OMRON CJ1G-CPU42P Manual.
Specifications: Inputs; 16 inputs; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system OMRON CJ1G-CPU42P Manual.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Coommunications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CJ1G-CPU42P FUNCTION BLOCK. Name: SYSMAC LINK Fiber-optic Power Supply.
Model: C200H-APS01.Model: CPM2C-10CDT1M-D. CPU Unit: Unitts with 10 I/O points CJ1G-CPU42P REFERENCE MANUAL.
2 MIL connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: --.