PLC FX2N-16MR-ES/UL PROGRAMMING MANUAL II MITSUBISHI FX2N-16MR-ES/UL Manual

Series Name: small F930GOT.
System screen display language: chinese.
Display: 4.4 inches.
Display color: monochrome (blue / white).
Display device: LCD STN.
Resolution: 240 * 80.
Installation type: panel mounting.
The built-in communication port: RS-422 (1ch) /RS-232C (1ch).
Power supply voltage: DC24V FX2N-16MR-ES/UL PROGRAMMING MANUAL II.
Touch screen also known as user interface or user interface,
Is a communication interface between human and computer,
Is an important part of the computer system FX2N-16MR-ES/UL
Is a medium for interaction and information exchange between the system and the user,
It realizes the transformation between the internal form of information and the acceptable form of human being.
Where there is a touch screen to participate in the field of human-computer information exchange FX2N-16MR-ES/UL PROGRAMMING MANUAL II. Max input / output points: 30 points.
Power supply voltage: 24VDC.
Input points: 16 points.
Output points: 14 points.
Output type: relay.
Power consumption (W): 8.
Weight (kg):0.35.
Size (WxHxD) mm:100x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device FX2N-16MR-ES/UL PROGRAMMING MANUAL II.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor MITSUBISHI FX2N-16MR-ES/UL Manual.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O MITSUBISHI FX2N-16MR-ES/UL Manual.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14 MITSUBISHI FX2N-16MR-ES/UL Manual.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator. Total input and output points: 40 points.
Input points: 24 points.
Output points: 16 points.
Output type: relay output.
Power supply voltage: AC100-240V.
Input signal voltage: DC24V.
8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Online programm editor, online change the program will not lose the working hours or stop production operation FX2N-16MR-ES/UL .
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program FX2N-16MR-ES/UL PROGRAMMING MANUAL II.