OMRON H3CA-A INSTRUCTION MANUAL

Control output: Contact output: DPDT (time-limit output).
Supply voltage: 24 VDC.
11-pin models.
Solid-state Timer with Valuable Multiple-time.
Ranges and Multiple-operating Modes.
Handles a wide range of applications through eight operating modes.
With H3BA-N8H models, the output type can be switched H3CA-A .
between time-limit DPDT and time-limit SPDT + instantaneous.
SPDT using a selector H3CA-A
Setting rings (order separately) to enable consistent settings.
and to limit the setting range.
Panel Covers (order separately) to enable various panel.
designs.
CE marking.
UL, CSA and CCC certification, conforms to LR. Classification: Preset Counter.
Input signal system (Count & reset inputs): Contact, Transistor H3CA-A .
Mounting method: Flush mounting, surface mounting.
Display: 7-segment LEDs (10 mm high), Up indicator.
Number of digits: 4 digits (0 to 9,999).
Backup power for memory protection: No.
Control output: Contact (SPST-NO).
Operating mode: Up counting.
Max.counting speed: 30 cps.
All Required Counter Functions.
Incorporated in a Compact DIN-sized.
(48 × 48) Housing.
In addition to Up and Down models, a reversible (Up-Down),
counter is also available H3CA-A .
Maximum counting speed of 5,000 cps, never before attained by,
a small-size preset counter.
Power supply freely selectable within a range of 100 to 240 VAC.
Also, power supply for the DC-operated models is selectable,
within a range of 12 to 48 V.
Models with memory backup function against power failure available. Outputs: Time-limit contact.
Supply voltage: 100 to 120 VAC; 200 to 240 VAC.
8-pin models.
DIN 48 × 48-mm Star-delta Timer.
A wide star-time range (up to 120 seconds) and star-delta.
transfer time range (up to 1 seconds). Supply voltage: 24 to 240 VAC/DC.
Control output: Contact output, SPDT (time-limit SPDT).
Four-mode Timer.
Multiple time ranges and operating modes let you cover a wide,
range of applications.
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT output contacts using a switch.
Sequence checks are easily performed by setting an instanta,
neous output to 0.
Start signal control for the H3DK-M. A DIN 48 × 24 Preset Counter.
Compact, Yet Equipped with.
Communication.
Only 48 × 24 × 83 mm (W × H × D),
Switch between 4-digit preset counter and 4-digit timer operation.
While using the preset counter, it is possible to switch the,
display to monitor the totalizing count vvalue (8 digits) H3CA-A INSTRUCTION MANUAL.
Built-in prescaling for counter operation.
ON/OFF-duty adjustable flicker mode that can be used to per,
form cyclic control is available for timer operation.
SV can be changed using front panel keys too any of four values,
preset in SV-banks H3CA-A INSTRUCTION MANUAL.
Water-proof structure to NEMA4X/IP66.
Conforms to UL, CSA, and IEC safety standards as well as CE Marking.