LK Automation Limited
Home >> Download >> OMRON >> Manual Download >> OMRON D4N-3D87 INSTRUCTION sheet safety limit switch Manual

OMRON D4N-3D87 INSTRUCTION sheet safety limit switch Manual

Product model: D4N-3D87
Name: safety limit switch
Brand: OMRON
Sort: INSTRUCTION sheet
File language: English
File size: 0.61MB
Ratings: 1 A at 125 VAC.
LED indicator: With indicator.
Actuator: Roller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection D4N-3D87 Manual.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) D4N-3D87
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Type: Welding / wire type, M3 screw mounting.
Drive rod: rod type Shibai leaf.
Terminal specifications: with wire, the right side of the lead D4N-3D87 Manual.
Contact specifications: 1a.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used for easy long stroke specifications (OT reference value: 1.4mm).
Without harmful substances to the environment, the lead type has also been lead-free D4N-3D87 Manual. Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @ OMRON safety limit switch Manual.
Conduit size (See Note.): G1/2.
World''s smallest Class 6-contact Guard Lock OMRON safety limit switch Manual.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available) OMRON safety limit switch Manual.
Key holding force of 1,300 N.
It is possible to change the key innsertion point D4N-3D87 INSTRUCTION sheet.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lockk Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames D4N-3D87 Manual.
The plastic material makes the Slide Key suitable,
for lightweight doors.
Related products
OMRON
Safety Limit Switch
D4N-1D62
OMRON Safety Limit Switch D4N-1D62
Actuator: One-way roller arm lever horizonta
OMRON
Pull-reset Safety Limit Switch
D4N-8C2HR
OMRON Pull-reset Safety Limit Switch D4N-8C2HR
Actuator: Adjustale roller lever, form lock
OMRON
Safety Limit Switch
D4N-6B31
OMRON Safety Limit Switch D4N-6B31
Actuator: Plunger. Conduit size: 2-conduit
OMRON
Safety Limit Switch
D4N-6F62
OMRON Safety Limit Switch D4N-6F62
Actuator: One-way roller arm lever horizonta