OMRON CQM1-LSE02 Instruction Sheet

Connects SYSMAC LINK Unit, Controller Link Unit to CPU Unit.
For 2 Unit.Model: C200H-OA222V.
No. of points: 12 pts.
Specifications: 0.3A, 250VAC.C500-NC Special I/O Unit Position Control For pulse motors 2 axes C500-NC211.Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 8 inputs; PNP;
Without Short-circuit and,
Disconnected Line Detection CQM1-LSE02 .
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CQM1-LSE02
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site CQM1-LSE02 .
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit type: CS1 Basic I/O Units.
Product name: DC Input Unit.
Specifications: 24 VDC, 7 mA,
64 inputs.
Mountable Racks: CPU Rack, CS1W-BC,
@@3,YES, @@2, YES;
C200HX/HG/HE Expansion I/O Rack, No.
CS1 Expansion Rack, CS1W-BI,@@3,YES,
@@2, YES; CS1 Long distance Expansion Rack,
Yes; SYSMAC BUS Slave Rack, No CQM1-LSE02 .
Words required: (I/O bits: CIO 0000 to CIO 0319), 4 words.
Current consumption: 5V system, 0.15A;
26 V system, --.
Standards: UC1, N, L, CE.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control. Type: CJ1 Special I/O Unit.
Connected ID System: V680 Series; 2 Heads.
External power supply: --.
No. of unit numbers used: 2 unit number.
Current consumption: 5V, 0.32A;
24V, 0.26A; External, --.
Communication Unit Dedicated for RFID V680,
Allowing Direct Connection to OMRON PLC CJ/
CS/NJ-series.
Communication unit for connecting RFID V680-series,
which can be used around the world, directly to PLC.
Allows batch transfer of data up to 32 kbytes. 2 platinum resistance thermometer inputs Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No. of axes: 16 axes.
No. of unit numbers allocatted: 1 CQM1-LSE02 Instruction Sheet.
Current consumption : 5V, 0.36A; 24V,--.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II CQM1-LSE02 Instruction Sheet.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.