LK Automation Limited
Home >> Download >> OMRON >> Manual Download >> OMRON CJ2M-CPU13 Manual CJ2M-CPU13 PROGRAMMING MANUAL


Product model: CJ2M-CPU13
Name: PLC
Brand: OMRON
File language: English
File size: 7.25MB
Name: Compact Connectors.
Specifications: Inputs/Outputs; 1 input/1 output; PNP.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery.
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit.
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices CJ2M-CPU13 PROGRAMMING MANUAL CJ2M-CPU13
Industry first bit slave connectable with round,
cables which can be easily purchased at a lower price.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications. 100 to 120/200 to 240 VAC (switchable), Wired.I/O capacity: 1, 024 pts (4, 096 max. with remote I/O).
Execution time: Basic: 0 CJ2M-CPU13 PROGRAMMING MANUAL. 125 µs min.Special: 0.5 µs min.
Product name: E@@S type CPU Units with 30 I/O Points.
Specifications: Power Supply, 100 to 240 VAC; Inputs, 18; Outputs, 12;
Output type: Relay.
Program capacity: 2K steps.
memory Data capacity: 2K words.
External powersupply(24 VDC): 0.30A.
Current consumption: 5 V, 0.17A; 24 V,0.07A.
Standards: UC1, N, L, CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient CJ2M-CPU13 PROGRAMMING MANUAL.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: R, S, K, J, T, L, B.
Conversion speed: 250 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and sppace compared,
with previous systems CJ2M-CPU13 Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CJ2M-CPU13 Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.
Related products
Programmable Controllers
OMRON Programmable Controllers CJ2M-CPU31
Product name: CJ2M Built-inEtherNet/IP CPU
Programmable Controllers
OMRON Programmable Controllers CJ2M-CPU14
Product name: CJ2M CPU Units. Specification
Programmable Controllers
OMRON Programmable Controllers CJ2M-CPU15
Product name: CJ2M CPU Units. Specification
Programmable Controllers
OMRON Programmable Controllers CJ2M-CPU35
Product name: CJ2M Built-inEtherNet/IP CPU