GOT-A900 Series Manual MITSUBISHI Graphic Operation Terminal GOT-A900 Series GT Works2 Version1/GT Designer2 Version1 compatible Extended•Option Functions Manual Operating Manual

Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 8.4 inches.
Display color: 16 color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422 MITSUBISHI Graphic Operation Terminal Operating Manual.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities) GOT-A900 Series
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed MITSUBISHI Graphic Operation Terminal Operating Manual.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface MITSUBISHI Graphic Operation Terminal Operating Manual.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water GOT-A900 Series Operating Manual GOT-A900 Series Operating Manual.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the connection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GOT-A900 Series Operating Manual. For external input / output devices and operation pannel connection (cathode common input / output) GOT-A900 Series Manual.
Applicable models: GT16, GT15, GT27, GT25. RS-422/485 serial communication unit (terminal unit).
When the temperature controller is connected to tthe temperature controller through the RS-485 or the GOT multi point connection, the controller can be used MITSUBISHI Graphic Operation Terminal Operating Manual.
Applicable models: GT15, GT16, GT27, GT25.