LK Automation Limited
Home >> Download >> MITSUBISHI >> Manual Download >> FX1N-24MT-001 Manual MITSUBISHI PLC FX1N-24MT-001 HARDWARE MANUAL

FX1N-24MT-001 Manual MITSUBISHI PLC FX1N-24MT-001 HARDWARE MANUAL

Product model: FX1N-24MT-001
Name: PLC
Brand: MITSUBISHI
Sort: HARDWARE MANUAL
File language: English
File size: 2.00MB
Input points: 16 points.
Power supply: the basic unit to the expansion module to provide power.
Terminal type: connector type.
Weight: 0.15kg.
FX3GC, FX3UC can be directly connected to the input and output expansion equipment, to achieve a compact expansion.
Can choose 16 points, 32 points of the relay or transistor input and output models MITSUBISHI PLC HARDWARE MANUAL.
FX2NC-16E_-T-DS for terminal units can be disassembled models FX1N-24MT-001 Input signal power: 40mA. DC24V
Axis of control: 1.
Output frequency: Max 200kHz.
Weight: 0.2kg.
FX3U-1PG is a pulse output module of the maximum output 200kHz pulse train.
7 operation modes needed to take the simple position control.
The speed and the target address can be changed in the positioning operation according to the operation of the project,
Support near S shape plus deceleration MITSUBISHI PLC HARDWARE MANUAL. High speed positioning can be carried out smoothly.
Up to 8 units can be connected to FX3U or FX3UC.
Connecting FX3UC requires FX2NC-CNV-IF or FX3UC-IPS-5V. Power: 55kw.
Purpose: to suppress the power harmonics.
Connected to the inverter input, can be used to improve the power factor, reduce the input side of the high harmonic current MITSUBISHI PLC HARDWARE MANUAL.
According to the motor power used to select AC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Power: 7.5kw.
Voltage: 400V FX1N-24MT-001 HARDWARE MANUAL.
There are 100% braking torque output in continuous regeneration, which can correspond to the continuous regeneration operation of the pipeline control FX1N-24MT-001 HARDWARE MANUAL.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space and reduce the comprehensive cost.
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving. MITSUBISHI inverter series: FR-A800 FX1N-24MT-001 HARDWARE MANUAL.
Voltage level: three phase 400V.
Power: 450kw.
SLD converter rated current: 1094A.
Structure and function: the rectification part is off type.
Type: CA.
Substrate coating: have.
To maximize the performance of the motor.
Advanced auto tuning function.
The newly developed PM motor auto tuning feature can be used to operate other manufacturers of PM motors (Yong Ci synchronous motors) in the sensorless state.
Not only can drive MITSUBISHI induction motor and PM motor, but also can drive other manufacturrers of induction motor and PM motor FX1N-24MT-001 Manual.
This means that you can reduce the cost of inventory and supplies.
If the PM motor is produced by a IPM motor or other company using MM-CF, the starting torque is limited to 50%,
EEven after tuning is not simple to use and positioning control of zero speed torque) induction motor and permanent magnet motor can be combined freely MITSUBISHI PLC HARDWARE MANUAL.
Related products
MITSUBISHI
PLC
FX1S-20MT-001
MITSUBISHI PLC FX1S-20MT-001
Total points: 20 points. Input points: 12 poi
MITSUBISHI
PLC
FX1N-24MT-D
MITSUBISHI PLC FX1N-24MT-D
Max input / output points: 24 points. Power s
MITSUBISHI
PLC
FX1N-24MR-D
MITSUBISHI PLC FX1N-24MR-D
Max input / output points: 24 points. Power s
MITSUBISHI
Output expansion board
FX1N-2EYT-BD
MITSUBISHI Output expansion board FX1N-2EYT-BD
Output extension oard transistor output 2 p