PLC CPU ZW-CE1 Series User's Manual OMRON ZW-CE1 Series Manual

Small, High-precision Enclosed Switch.
Small, High-precision Enclosed Switches with Built-in Basic,
Switches for High Repeatability and Durability of 10 Million,
Operations Minimum.
Same mounting pitch as Z Basic Switch.
Requires less operating force than conventional limit switches.
Lineup includes modes with operation indicators for easy,
maintenance and inspection ZW-CE1 Series User's Manual ZW-CE1 Series
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for Information on approved models.). Optical system: positive and negative radiation.
Detection distance: 40 positive and negative 2.5mm.
Beam shape: linear beam.
Beam diameter: 2000mm * 35 M.
Resolution: 0.4 M.
Cable length: 4m. Classification: High-capacity ZW-CE1 Series User's Manual.
Contact gap: E (1.8 mm).
Actuator: Panel mount cross roller plunger.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available ZW-CE1 Series User's Manual.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output OMRON ZW-CE1 Series Manual.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments OMRON ZW-CE1 Series Manual.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Actuator: Sealed (Booted); One-way action sealed roller arm lever; AC.
Mounting: Base mounting.
Approved standards: UL CSA.
General-purpose Enclosed OMRON ZW-CE1 Series Manual.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have alsoo been added,
to the series ZW-CE1 Series .
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with gground terminals have CE marking ZW-CE1 Series User's Manual.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)