E5CN-HV2MD-500 USER'S MANUAL OMRON E5CN-HV2MD-500 Manual

Sensing method: Through-beam type.
Sensing distance: 300 mm.
Output type: NPN output.
Output configuration: Dark-ON.
Cable length: 2 m.
Cable length from emitter to amplifier: 1 m.
Compact, Thin-profile.
Photomicrosensor with special amplifier.
Slim amplifier (50 × 7.5 × 12 mm) can be handled like a cable OMRON E5CN-HV2MD-500 Manual.
Provided with two operation indicators, enabling monitoring from the,
amplifier housing and sensor head E5CN-HV2MD-500
Simple wiring with a 3-conductor cable.
Wide operating voltage range: 12 to 24 VDC. Free change detection direction.
Easy to use small cube type.
Can change the direction of detection according to the position of the front and side (15 degree). Size: 96 x 96mm.
Control output 1: voltage output (SSR driver) OMRON E5CN-HV2MD-500 Manual.
Control output 2: voltage output (SSR driver).
Auxiliary output: 2 independent points.
Power supply voltage: AC100 ~ 240V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: 1 points.
Communication: RS-485.
Event input: 6 points.
Remote SP input: there.
Transfer output: have OMRON E5CN-HV2MD-500 Manual.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point transfer output and remote SP input, suitable for a wide range of applications.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperature controller is connected to each other by using the component communication.
A new type of proportional control allows you to control the valve. Size: 48 x 96mm.
Control output 1: relay output (open).
Control output 2: relay output (off).
Auxiliary output: 2.
Communication mode: RS-485.
Heater disconnection: -.
Event input: 2.
Plug in terminal.
Potentiometer input: there.
Power supply voltage: AC100 ~ 240V.
New highlight LCD panel, font larger, display more cleearly integrated low power design,
Longer life performance stability,
Perfect function of proportional valve control special (some models have no potentiometer input virtual opening function)
E5AC-PR-800 white LCDPV ddisplay height to reach 25mm, greatly improve the visibility E5CN-HV2MD-500 USER'S MANUAL E5CN-HV2MD-500 USER'S MANUAL.
The main body is short, and the diameter is only 60mm.
50ms high speed sampling period.