CA2-ISOALL232-01 User's Manual Proface CA2-ISOALL232-01 Manual

For RGB input USB cable to prevent disconnection (2 / set)COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector13 pin input connectors for HTB and 16 pin output connectors. (1 / set)For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set) Proface CA2-ISOALL232-01 Manual. 2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA2-ISOALL232-01Used in a variety of host and man-machine interface for RS-422 connectionCOM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface Proface CA2-ISOALL232-01 Manual. For 5.7 inch models, for fixing the hooks of the three EX modules.COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionUSB cable clamp for preventing disconnection of connection (5 / set)The main controller is connected to the man-machine interface for MPI communicationSlave station module for connecting support for CANopenA connector that connects the DIO interface for connecting an external I/O device (5 sets) Proface CA2-ISOALL232-01 Manual. 5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.Use external output for the GP3000 series of auxiliary connectors (5 / sets).1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Suitable for A/B+ Type modelsExpansion module for the GP3000 access to the PROFIBBUS network and DP PROFIBUS master communication15 inches, replaced by a host of backlight (1) CA2-ISOALL232-01 User's Manual. COM2 adapter for converting the COM2 interface to the RS-422 terminal block7.5 inches, GP installed to the hard panel to prrovide dust and moisture proof function CA2-ISOALL232-01 User's Manual. For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.