MITSUBISHI HG-SN152BJ-S100 Electric machinery

Motor series: low inertia, small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.1kw.
Rated speed: 3000rpm.
With the brake: without.
Shaft end: straight shaft.
AC servo motor and brushless DC servo motor in the function of the difference: AC servo is better, because it is a sine wave control, torque ripple small HG-SNN152BJ-S100.
DC servo is a trapezoidal wave. DC servo is simple and cheap. Motor series: low inertia, medium capacity.
Rated output power: 12 HG-SN152BJ-S100.0kw.
Rated speed: 1000rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor HG-SN152BJ-S100 MITSUBISHI HG-SN152BJ-S100.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) MITSUBISHI HG-SN152BJ-S100. Motor series: low inertia, medium power.
Rated output power: 30.0kw.
Rated speed: 2000r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range MITSUBISHI HG-SN152BJ-S100. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveeyor machinery HG-SN152BJ-S100.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring.